How To Use
1. Fill the Water Reservoir with cold water. Do not overfill. If the Water Reservoir is overfilled, the water will overflow from a hole on the back of the product.
2. Use the Coffee Spoon to add filter coffee into the Removable Permanent Filter. We recommend 7g (one spoon) of coffee per cup, use more ground coffee if you desire a stronger flavour. Place the Filter into the Removable Filter Holder in the Coffee Maker.
3. Close the Lid and replace the Glass Carafe into the Coffee Maker.
4. Press the On/Off Button to start the brewing process, the Red Heating Light will illuminate. To stop the brewing process, press the On/Off Button a second time. Alternatively, not pressing the On/Off Button a second time allows the unit to automatically enter Keep Warm mode for 40 minutes.
- If you live in a hard water area, we recommend that your Coffee Maker is descaled at regular intervals, e.g. every 1-2 months. In areas of moderately hard water, you should descale every 6 months.
- If the water filters through more slowly than usual, or if water still remains in the reservoir at the end of a cycle, it is a sign that descaling is necessary.
- We recommend you use a proprietary liquid descaler which is especially made for coffee makers and plastic kettles. Follow the instructions on the bottle or sachet, and then operate the Coffee Maker with just water 3 times before making coffee.
- Do not use a kettle descaler unless the packet states it is suitable for Coffee Makers.
Allow 3 minutes to cool before refilling with cold water.
1. Fill the Water Reservoir with cold water. Do not overfill. If the Water Reservoir is overfilled, the water will overflow from a hole on the back of the product.
2. Use the Coffee Spoon to add filter coffee into the Removable Permanent Filter. We recommend 7g (one spoon) of coffee per cup, use more ground coffee if you desire a stronger flavour. Place the Filter into the Removable Filter Holder in the Coffee Maker.
3. Close the Lid and replace the Glass Carafe into the Coffee Maker.
4. Press the Auto/Prog Button so that the Green Programme Light illuminates and 12:00 AM flashes on the Display Screen.
5. Select the brewing start time using the Hour and Minute Buttons.
6. When you have selected the desired time, wait until the time and the Green Programme Light stop flashing. Once set, the Display Screen will return to displaying the current time. To activate the timer, press and hold the Auto/Prog Button for approximately 5 seconds. The Green Programme Light will illuminate and the programme is set.